Fashion Accessories Designing:

HOW TO INSTALL MAGNETIC SNAPS

.  
Magnetic Snaps add extra security to a purse and gives it  more of a professional look. Magnetic Snaps come in different  finishes, sizes and shapes. A complete magnetic snap set will include  (1) female part, (1) male part and two washers or backs for the 2 parts of the snap. The washers were made to fit right over the 
prongs of the snaps.

.

Materials Needed:
  • Female Part (1)
  • Male Part (1)
  • Washers ( 2 )
  • Stabilizer ( Optional)
    Suggested Stabilizers:  
    batting or small piece of  interfacing or plastic canvas.
 

Step: 1
Find the midpoint on your purse and cut 2 slits in the fabric at the location where you plan to put the snap. It is a good idea to use a fabric marker to  mark off the midpoint location. (Figure 1)


  (Figure 1) 

.
Step: 2
Take one part of the magnetic snap male or female and push the metal prongs through the slit of the fabric. Please note  that the prongs should be hanging on the inside or wrong side of your bag. 

(Figure 2) 

 
Step: 3
Add a small piece of stabilizer of  your choice (see above for suggested stabilizers). If using plastic canvas push the canvas against the prongs and push the prongs through the the holes of the canvas other wise make  2 slits in the stabilizer to push prongs through. This will hold the prongs in place and provides stability to the snap. 
 
Step: 4
Next add the washers and push prongs through the holes of the  washer and press outward and down to secure. If you prefer you can also press the prongs inward
either way is correct. I prefer outward. Repeat these steps to attach the opposite end of the magnetic snap make sure they line up correctly. (Figure 3)
.

(Figure 3)

 
 
 
 


       
   

Copyright ©2010 All rights reserved -
Lees crafts and Things